Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Static Route Configuration
Commands
Huawei Technologies Proprietary
1-5
Field Description
NoAdvise
The routing protocol does not
redistribute NoAdvise route
when it redistributes routes
based on the policy.
NotInstall
Normally, the routing protocol
selects the route with the
highest preference from its
routing table, places it in its core
routing table, and redistributes
it. Although the NotInstall route
cannot be placed in the core
routing table, it is possibly that it
is selected and redistributed.
Reject
Unlike the normal routes, the
Reject route will discard the
packets that select it as their
route, and the router will send
ICMP unreachable message to
the source end. Reject route is
usually used for the network test
Retain
When the routes from the
routing table are deleted, the
routes with Retain flag will not
be deleted. Using this function
you can set Retain flag for some
static routes, so that they can
exist in the core routing table.
Static
The route with Static flag will not
be cleared from the routing table
after you save it and reboot the
router. Generally, the static
route configured manually in the
router belongs to a Static route.
Unicast Unicast route
Age Time to live, in the format of hour/minute/second (hh:mm:ss).
Cost Value of the cost
1.1.3 display ip routing-table ip-address
Syntax
display ip routing-table ip-address [ mask ] [ longer-match ] [ verbose ]
View
Any view

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English