Command Manual – IP Address and Confiugration
Quidway S3900 Series Ethernet Switches-Release
1510 Chapter 2 IP Performance Configuration Commands
2-2
Field Description
Nexthop Next hop address
Flag
Flags:
U: A route is up and available.
G: Gateway route
H: Local host route
B: Blackhole route
D: Dynamic route
S: Static route
R: Rejected route
E: Multi-path equal-cost route
L: Route generated by ARP or ESIS
TimeStamp Timestamp
Interface Forwarding interface
2.1.2 display fib ip-address
Syntax
display fib ip-address1 [ { mask1 | mask-length1 } [ ip-address2 { mask2 |
mask-length2 } | longer ] | longer ]
View
Any view
Parameter
ip-address1, ip-address2: Destination IP addresses, in dotted decimal notation.
ip_address1 and ip_address2 together define an address range. The FIB entries in
this address range will be displayed.
mask1, mask2: IP address masks, in dotted decimal notation.
mask-length1, mask-length2: Integers in the range of 0 to 32, representing the mask
length.
longer: Displays the FIB entries matching specific network/mask.
To Next Page
Loading...
