Huawei Quidway S3900 Series Command Manual

Command Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Port Basic Configuration
Commands
Huawei Technologies Proprietary
1-25
1.1.25 port hybrid pvid vlan
Syntax
port hybrid pvid vlan vlan-id
undo port hybrid pvid
View
Ethernet port view
Parameter
vlan-id: VLAN ID defined in IEEE802.1Q, in the range of 1 to 4094. It is 1 by default.
Description
Use the port hybrid pvid vlan command to set the default VLAN ID for the hybrid port.
Use the undo port hybrid pvid command to restore the default VLAN ID of the port.
Related command: port link-type.
Caution:
You are recommended to set the default VLAN ID of the local hybrid or trunk ports to
the same value as that of the hybrid or trunk ports on the peer switch. Otherwise,
packet forwarding may fail on the ports.
Example
# Set the default VLAN ID of the hybrid port Ethernet1/0/1 to 100.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] port link-type hybrid
[Quidway-Ethernet1/0/1] port hybrid pvid vlan 100
1.1.26 port hybrid vlan
Syntax
port hybrid vlan vlan-id-list { tagged | untagged }
undo port hybrid vlan vlan-id-list
View
Ethernet port view

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English