Huawei Quidway S3900 Series - Flash Memory

Command Manual – System Maintenance and Debugging
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Basic System Configuration & De
bugging Commands
Huawei Technologies Proprietary
1-11
Parameter
None
Description
Use the display diagnostic-information command to display system diagnostic
information, or save system diagnostic information to a file suffixed with diag in the
Flash memory.
Example
# Save system diagnostic information to the file default.diag..
<Quidway> display diagnostic-information
This operation may take a few minutes, continue?[Y/N]y
Diagnostic-information is saved to Flash or displayed(Y=save
N=display)?[Y/N]y
Please input the file name(*.diag)[flash:/default.diag]:
The file is already existing, overwrite it? [Y/N]y
% Output information to file: flash:/default.diag.
Please wait......
# Display the current diagnostic information of the system.
<Quidway> display diagnostic-information
This operation may take a few minutes, continue?[Y/N]y
Diagnostic-information is saved to Flash or displayed(Y=save
N=display)?[Y/N]n
-------------------- display version --------------------
Huawei Versatile Routing Platform Software
VRP Lanswitch Platform Software Version COMWAREV300R002B15D001
Quidway S3928P-EI Software Version V100R002B03D001SP01-EI
Quidway S3928P-EI Product Version 3900-EI-1505
Web Network Manager Version WNMV300R001B05D024
Copyright(c) 1998-2006 Huawei Tech. Co.,Ltd. All rights reserved.
Compiled Feb 18 2006 20:55:30, RELEASE SOFTWARE
Quidway S3928P-EI uptime is 1 week, 1 day, 2 hours, 55 minutes
Quidway S3928P-EI with 1 MIPS Processor
64M bytes DRAM
16384K bytes Flash Memory
Config Register points to FLASH