Huawei Quidway S3900 Series - Reset Arp

Command Manual – ARP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 ARP Configuration Commands
Huawei Technologies Proprietary
1-8
If no ARP mapping entry in the cache matches the packet, an ARP mapping entry
corresponding to the packet is created.
Example
# Enable the gratuitous ARP packet learning function on the switch named QuidwayA.
<QuidwayA> system-view
System View: return to User View with Ctrl+Z.
[QuidwayA] gratuitous-arp-learning enable
1.1.9 reset arp
Syntax
reset arp [ dynamic | static | interface interface-type interface-number ]
View
User view
Parameter
dynamic: Clears dynamic ARP mapping entries.
static: Clears static ARP mapping entries.
interface-type: Port type.
interface-number: Port number.
Description
Use the reset arp command to clear specific ARP mapping entries.
Related command: arp static, display arp.
Example
# Clear static ARP mapping entries.
<Quidway> reset arp static