Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-16
Parameter
value: Additional route metric added when receiving a RIP route, ranging from 0 to 16.
By default, the value is 0.
Description
Use the rip metricin command to configure the additional route metric added to the
RIP routes received on an interface.
Use the undo rip metricin command to restore the default value of this additional route
metric.
Related command: rip metricout.
Example
# Set the additional route metric added to RIP routes received on Vlan-interface 10 to 2.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] rip metricin 2
2.1.18 rip metricout
Syntax
rip metricout value
undo rip metricout
View
Interface view
Parameter
value: Additional route metric added when transmitting a RIP route, ranging from 1 to
16. By default, the value is 1.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English