Huawei Quidway S3900 Series - Display Snmp-Agent Mib-View

Command Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 SNMP Configuration Commands
Huawei Technologies Proprietary
1-3
Description
Use the display snmp-agent group command to view group name, security model,
state of various views and storage models.
Example
# Display SNMP group name and security model.
<Quidway> display snmp-agent group
Group name: v3r2
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview :<no specified>
Storage-type: nonvolatile
The following table describes the output fields.
Table 1-2 Description on the fields of the display snmp-agent group command
Field Description
Group name SNMP group name of the user
Security model
Security model of that group, including authorization and
encryption (AuthPriv), authorization and no encryption
(AuthnoPriv), no authorization and no encryption
(noAuthnoPriv).
Readview Read-only MIB view name corresponding to that group
Writeview Writable MIB view corresponding to that group
Notifyview The name of the notify MIB view corresponding to that group
storage-type
Storage type, including volatile, nonVolatile, permanent,
readOnly and other.
1.1.4 display snmp-agent mib-view
Syntax
display snmp-agent mib-view [ exclude | include | viewname view-name ]
View
Any view
Parameter
exclude: Displays the SNMP MIB view (excluded).
Include: Displays the SNMP MIB view (included).