Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510 Chapter 1 HGMPv2 Configuration Commands
Huawei Technologies Proprietary
1-10
00e0-fc00-3900 Ethernet3/0/21 Ethernet1/0/22 100 FULL
5600-0000-3334 GigabitEthernet1/0/32 Ethernet1/0/4 100 FULL
Table 1-4 Description on the fields of the display ntdp device-list
verbose command
Field Description
Hostname System name of the device
MAC Mac address of the device
Hop
Number of hops from the device to the device
which launches the topology collection
Platform Software platform of the device
IP
IP address of the cluster management VLAN
interface on the device
Version Version of the device
Cluster The role of the device in the cluster
Peer MAC MAC address of a neighbor device
Native Port ID
Name of the local port which a neighbor device is
connected to
Peer Port ID Name of the peer port connected to the local port
Speed Speed of the neighbor device port
Duplex Duplex mode of the neighbor device port
1.2.3 ntdp enable
Syntax
ntdp enable
undo ntdp enable
View
System view, Ethernet port view
Parameter
None
To Next Page
Loading...
Need help?
General