Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 4 IP Routing Policy Configuration
Commands
Huawei Technologies Proprietary
4-8
4.1.9 if-match tag
Syntax
if-match tag value
undo if-match tag
View
Route policy view
Parameter
value: Tag field value.
Description
Use the if-match tag command to configure to match the tag field of route information.
Use the undo if-match tag command to cancel the existing matching rules.
Related command: if-match interface, if-match acl, if-match ip-prefix, if-match ip
next-hop, if-match cost, route-policy, apply cost, and apply tag.
Example
# Define an if-match clause to permit the OSPF route information whose tag value is 8
to pass the if-match clause.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] route-policy policy permit node 1
%New sequence of this list
[Quidway-route-policy] if-match tag 8
4.1.10 ip ip-prefix
Syntax
ip ip-prefix ip-prefix-name [ index index-number ] { permit | deny } network len
[ greater-equal greater-equal | less-equal less-equal ] *
undo ip ip-prefix ip-prefix-name [ index index-number | permit | deny ]
View
System view
Parameter
ip-prefix-name: Name of address prefix list. It identifies an address prefix list uniquely.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English