Huawei Quidway S3900 Series Command Manual

Command Manual –SSH Terminal Service
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 SSH Terminal Service
Configuration Commands
Huawei Technologies Proprietary
1-27
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ssh2 10.214.50.51 prefer_kex dh_exchange_group prefer_stoc_cipher
aes128 prefer_ctos_hmac md5 prefer_stoc_hmac sha1_96
1.2.10 ssh2 source-interface
Syntax
ssh2 source-interface interface-type interface-number
undo ssh2 source-interface
View
System view
Parameter
interface-type: Type of source interface, which can be LoopBack or Vlan-interface.
interface-number: Number of source interface.
Description
Use the ssh2 source-interface command to specify source interface for SSH2 Client.
When the specified interface does not exist, the command prompts the configuration
fails.
Use the undo ssh2 source-interface command to remove the specified source
interface. Then the address of the device determined by the system is for the user to
access to the SSH2 Server.
Example
# Specify source interface Vlan-interface 1 for SSH2 Client.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ssh2 source-interface Vlan-interface 1
1.2.11 ssh2 source-ip
Syntax
ssh2 source-ip ip-address
undo ssh2 source-ip
View
System view

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English