Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510 Chapter 1 HGMPv2 Configuration Commands
Huawei Technologies Proprietary
1-29
verbose: Displays the detailed information about all the devices in a cluster.
Description
Use the display cluster members command to display the information about cluster
members.
Execute this command on management devices only.
Example
# Display the information about all the devices in the cluster.
<aaa_0.Quidway-cluster> display cluster members
SN Device MAC Address Status Name
0 S3900 00e0-fc00-3901 Admin aaa_0.Quidway
1 S3900 3900-0000-3334 Up aaa_1.Quidway
2 S3900 00e0-fc00-3190 Up aaa_2.3900-3
Table 1-8 Description on the fields of the display cluster members
command (A)
Field Description
SN Member number
Device Device type
MAC Address MAC address of a device
Status State of a device
Name Name of a device
# Display the detailed information about the management device and all member
devices.
<aaa_0.Quidway-cluster> display cluster members verbose
Member number:0
Name:aaa_0.Quidway
Device:S3900
MAC Address:00e0-fc00-3901
Member status:Admin
Hops to administrator device:0
IP: 100.100.1.1/24
Version:
Huawei Versatile Routing Platform Software
VRP (tm) Software, Version 3.10
Copyright (c) 1998-2006 Huawei Tech. Co.,Ltd. All rights reserved.
To Next Page
Loading...
Need help?
General