Huawei Quidway S3900 Series - Chapter 1 DHCP Server Configuration Commands; DHCP Server Configuration Commands; Bims-Server

New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DHCP Server Configuration
Commands
Huawei Technologies Proprietary
1-1
Chapter 1 DHCP Server Configuration Commands
 Note:
The contents of this chapter are only applicable to the S3900-EI series among S3900
Series Switches.
1.1 DHCP Server Configuration Commands
1.1.1 bims-server
Syntax
bims-server ip ip-address [ port port-number ] sharekey key
undo bims-server
View
DHCP address pool view
Parameter
ip ip-address: IP address of the remote BIMS server.
port port-number: Port number of the remote BIMS, ranging from 1 to 65534.
sharekey key: Shared key of the remote BIMS server, a string containing 1 to 16
characters. It cannot be null.
Description
Use the bims-server command to configure the connection between a DHCP global
address pool and a BIMS server.
Use the undo bims-server command to remove the configuration of the connection
between a DHCP global address pool and a BIMS server.
By default, no connection is configured.
Related command: dhcp server bims-server.
 Note:
Branch intelligent management system (BIMS) is a network management software
provided by Huawei Technologies Co., Ltd.