Command Manual - DNS
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 DNS Configuration Commands
Huawei Technologies Proprietary
1-3
Parameter
Dynamic: Display the DNS Server information configured by DHCP or other protocols
Description
Use the display dns server command to display the DNS Server information.
Related command: dns server.
Example
# Display the DNS Server information.
<Quidway> display dns server
Domain-server IpAddress
0 169.254.65.125
1 169.254.66.15
Table 1-3 Description on fields of the display dns server command
Field Description
Domain-server
Number of the DNS Server. Configured automatically
by the device, starts from 0.
Servers with IPv4 or IPv6 addresses are numbered
respectively.
IpAddress IPv4 address of the DNS Server
Ipv6Address IPv6 address of the DNS Server
Interface Name
Only available when the DNS Server is configured
with an IPv6 address.
1.1.4 display ip host
Syntax
display ip host
View
Any view
Parameter
None
Description
Use the display ip host command to display the host names and corresponding IP
addresses in the static domain name resolution resolving list.