New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DHCP Server Configuration
Commands
Huawei Technologies Proprietary
1-42
undo static-bind mac-address
View
DHCP address pool view
Parameter
mac-address: MAC address of the host to which the IP address is to be bound. You
need to provide this argument in the form of H-H-H.
Description
Use the static-bind mac-address command to specify a MAC address to which an IP
address will be bound statically.
Use the undo static-bind mac-address command to remove such a MAC address.
By default, no such MAC address is specified.
Note that:
z The static-bind ip-address command must be used together with the
static-bind mac-address command, to respectively specify a statically bound IP
address and MAC address.
z If you execute the static-bind mac-address command or the static-bind
client-identifier command repeatedly, the new configuration overwrites the
previous one.
Related command: dhcp server ip-pool and static-bind ip-address.
Example
# Enter system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
# Bind the IP address 10.1.1.1 (with the subnet mask 255.255.255.0) to the MAC
address 0000-e03f-0305.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Quidway-dhcp-pool-0] static-bind mac-address 0000-e03f-0305
1.1.40 voice-config
Syntax
voice-config { ncp-ip ip-address | as-ip ip-address | voice-vlan vlan-id { disable |
enable } | fail-over ip-address dialer-string }
undo voice-config [ ncp-ip | as-ip | voice-vlan | fail-over ]
To Next Page
Loading...
Need help?
General