Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-59
Example
# Set the real-time accounting interval of the RADIUS scheme radius1 to 51 minutes.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1] timer realtime-accounting 51
1.2.31 timer response-timeout
Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS scheme view
Parameter
seconds: Response timeout time of RADIUS servers, ranging from 1 second to 10
seconds.
Description
Use the timer response-timeout command to set the response timeout time of
RADIUS servers.
Use the undo timer response-timeout command to restore the default response
timeout timer of RADIUS servers.
By default, the response timeout time of the RADIUS server is 3 seconds.
Note that:
z If the switch gets no response from the RADIUS server after sending out a
RADIUS request (authentication/authorization request or accounting request)
and waiting for a time, it should retransmit the packet to ensure that the user can
obtain the RADIUS service. This wait time is called response timeout time of
RADIUS servers; and the timer in the switch system that is used to control this
time is called the response timeout timer of RADIUS servers. You can use the
timer response-timeout command to set the timeout time of this timer.
z Appropriately setting the timeout time of this timer according to the network
situation can improve the performance of the system.
z This command has the same effect with the timer command.
Related command: radius scheme and retry.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English