Huawei Quidway S3900 Series Command Manual

Command Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Information Center Configuration
Commands
Huawei Technologies Proprietary
1-12
This command works only when the information center is enabled for the system.
Related command: info-center enable and display info-center.
Example
# Set channel 0 to send information to user terminal.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center monitor channel 0
1.1.13 info-center snmp channel
Syntax
info-center snmp channel { channel-number | channel-name }
undo info-center snmp channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10
channels of the system.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the info-center snmp channel command to set the channel through which
information is output to the SNMP.
Use the undo info-center snmp channel command to restore the default channel
through which information is output to the SNMP, that is, channel 5.
Related command: snmp-agent and display info-center.
Example
# Set the switch to output information to the SNMP agent through channel 6.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center snmp channel 6

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English