Command Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 RMON Configuration Commands
Huawei Technologies Proprietary
2-12
2.1.9 rmon history
Syntax
rmon history entry-number buckets number interval sampling-interval [ owner text ]
undo rmon history entry-number
View
Ethernet port view
Parameter
entry-number: History entry index, in the range of 1 to 65535.
buckets number: Specifies the size of the history table that corresponds to the entry, in
the range of 1 to 65535.
interval sampling-interval: Specifies the sampling interval (in seconds). The
sampling-interval argument ranges from 5 to 3,600.
owner text: Specifies the owner of the entry, a string comprising 1 to 127 characters.
Description
Use the rmon history command to add an entry to a history control table.
Use the undo rmon history command to delete an entry from a history control table.
You can use the rmon history command to sample a specific port. You can also set the
sampling interval and the number of the samples that can be saved. After you execute
this command, the RMON system samples the port periodically and stores the samples
for later retrieval. The sampled information includes utilization, the number of errors,
and total number of packets.
You can use the display rmon history command to display the statistics of the history
control table.
Example
# Create the history entry numbered 1 for Ethernet1/0/1 port, with the table size being
10, the sampling interval being 5 seconds, and the owner being user1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]interface Ethernet 1/0/1
[Quidway-Ethernet1/0/1]rmon history 1 buckets 10 interval 5 owner user1
# Remove the history entry numbered 15.
[Quidway-Ethernet1/0/1] undo rmon history 15
To Next Page
Loading...
Need help?
General