Huawei Quidway S3900 Series - Link-Aggregation Group Agg-ID Mode; Port Link-Aggregation Group

Command Manual – Link Aggregation
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Link Aggregation Configuration
Commands
Huawei Technologies Proprietary
1-9
1.1.9 link-aggregation group agg-id mode
Syntax
link-aggregation group agg-id mode { manual | static }
undo link-aggregation group agg-id
View
System view
Parameter
agg-id: Aggregation group ID, in the range of 1 to 416.
manual: Creates a manual aggregation group.
static: Creates a static aggregation group.
Description
Use the link-aggregation group agg-id mode command to create a manual or static
aggregation group.
Use the undo link-aggregation group command to remove an aggregation group.
Related command: display link-aggregation summary.
Example
# Create manual aggregation group 22
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] link-aggregation group 22 mode manual
1.1.10 port link-aggregation group
Syntax
port link-aggregation group agg-id
undo port link-aggregation group
View
Ethernet port view
Parameter
agg-id: Aggregation group ID, in the range of 1 to 416.