Huawei Quidway S3900 Series Command Manual

Command Manual - Management VLAN
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Management VLAN Configuration
Commands
Huawei Technologies Proprietary
1-2
1.1.2 display interface Vlan-interface
Syntax
display interface Vlan-interface [ vlan-id ]
View
Any view
Parameter
vlan-id: ID of the management VLAN interface the information about which is to be
displayed.
Description
Use the display interface Vlan-interface command to display the information about
the management VLAN interface, including the physical and link status, the format of
the sent frames, the MAC address, IP address (and subnet mask), description string
and MTU (maximum transmit unit) of the management VLAN.
Related command: interface Vlan-interface.
Example
# Display the information about the management VLAN interface. (Assume that VLAN
1 is the management VLAN.)
<Quidway> display interface Vlan-interface 1
Vlan-interface1 current state : DOWN
Line protocol current state : DOWN
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is
00e0-fc07-4101
Internet Address is 192.168.0.39/24 Primary
Description : HUAWEI, Quidway Series, Vlan-interface1 Interface
The Maximum Transmit Unit is 1500
Table 1-1 Description on the fields of the display interface Vlan-interface command
Field Description
Vlan-interface current state Current state of Vlan-interface1
Line protocol current state Current state of the line protocol
IP Sending Frames' Format Format of the frames that IP sends
Hardware address
MAC address corresponding to the
management VLAN interface
Internet Address Primary Primary IP address
Description VLAN interface description

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English