Huawei Quidway S3900 Series Command Manual

Command Manual – 802.1x
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-9
Description
Use the dot1x guest-vlan command to enable the Guest VLAN function for specified
ports.
Use the undo dot1x guest-vlan command to disable the Guest VLAN function for
specified ports.
When being executed in system view:
z If you do not provide the interface-list argument, these two commands apply to all
ports of the switch.
z If you specify the interface-list argument, these two commands apply to the
specified Ethernet ports.
When being executed in Ethernet port view, these two commands apply to the current
Ethernet port only. In this case, the interface-list argument is not needed.
Caution:
z The Guest VLAN function is available only when the switch operates in a port-based
authentication mode.
z Only one Guest VLAN can be configured for each switch.
z The Guest VLAN function is unavailable when the dot1x dhcp-launch command is
configured on the switch, because the switch does not send authentication request
packets.
Related commands: name, vlan-assignment-mode.
Example
# Specify the authentication method to be port-based authentication.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] dot1x port-method portbased
# Enable the Guest VLAN function for all ports.
[Quidway] dot1x guest-vlan 1
1.1.6 dot1x max-user
Syntax
dot1x max-user user-number [ interface interface-list ]
undo dot1x max-user [ interface interface-list ]

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English