Huawei Quidway S3900 Series - Jumboframe Enable

Command Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Port Basic Configuration
Commands
Huawei Technologies Proprietary
1-17
Range of port number
Switch model
Ethernet port GigabitEthernet port
S3928P-SI
S3928TP-SI
S3928P-PWR-SI
S3928P-EI
S3928F-EI
S3928P-PWR-EI
1 to 24 1 to 4
S3952P-SI
S3952P-EI
S3952P-PWR-EI
1 to 48 1 to 4
Description
Use the interface command to enter Ethernet port view. To configure parameters for a
port, you must enter the port view first.
Example
# Enter Ethernet1/0/1 port view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet 1/0/1
[Quidway-Ethernet1/0/1]
1.1.16 jumboframe enable
Syntax
jumboframe enable
undo jumboframe enable
View
Ethernet port view
Parameter
None
Description
Use the jumboframe enable command to allow jumbo frames that are not larger than
9216 bytes to pass through the current Ethernet port.