Huawei Quidway S3900 Series Command Manual

Command Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Information Center Configuration
Commands
Huawei Technologies Proprietary
1-11
Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Use the info-center loghost source command to configure the source interface
through which information is sent to the log host.
Use the undo info-center loghost source command to cancel the source interface
configuration.
Related command: info-center enable and display info-center.
Example
# Configure Vlan-interface 1 as the source interface through which information is sent
to the log host.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] info-center loghost source Vlan-interface 1
1.1.12 info-center monitor channel
Syntax
info-center monitor channel { channel-number | channel-name }
undo info-center monitor channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10
channels of the system.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the info-center monitor channel command to set the channel through which
information is output to user terminals.
Use the undo info-center monitor channel command to disable the information
output.
By default, the switch outputs information to user terminal.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English