Huawei Quidway S3900 Series Command Manual

Command Manual – VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-11
50 1 ipx raw
80 2 at
100 3 snap etype 0x0abc
100 4 llc dsap 0xac ssap 0xbd
1.3.2 display protocol-vlan vlan
Syntax
display protocol-vlan vlan { vlan-id [ to vlan-id ] | all }
View
Any view
Parameter
vlan-id: VLAN ID in the range of 1 to 4094.
to: Specifies a VLAN ID range. Make sure the vlan-id argument to the right of this
keyword is larger than or equal to the argument to the left of this keyword.
all: Specifies all VLANs.
Description
Use the display protocol-vlan vlan command to display the protocol information and
protocol indexes configured for specified VLANs.
Related command: display vlan.
Example
# Display the protocol information and protocol indexes configured for VLAN 10
through VLAN 20.
<Quidway> display protocol-vlan vlan 10 to 20
VLAN ID: 10
VLAN Type: Protocol-based VLAN
Protocol-Index Protocol-Type
0 ip
1 ip
2 ipx ethernetii
3 at
VLAN ID: 15
VLAN Type: Protocol-based VLAN
Protocol-Index Protocol-Type
0 ip
1 snap etype 0x0abcd

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English