Huawei Quidway S3900 Series - Reset Dhcp Server Conflict; Reset Dhcp Server Ip-In-Use

New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DHCP Server Configuration
Commands
Huawei Technologies Proprietary
1-38
Example
# Enter system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
# Configure option 100 to be 0x11 and 0x22 for the global DHCP address pools.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-pool-0] option 100 hex 11 22
1.1.34 reset dhcp server conflict
Syntax
reset dhcp server conflict { all | ip ip-address }
View
User view
Parameter
ip ip-address: Specifies an IP address, whose conflict statistics will be cleared.
all: Clears all address conflict statistics.
Description
Use the reset dhcp server conflict command to clear address conflict statistics.
Related command: display dhcp server conflict.
Example
# Clear all address conflict statistics.
<Quidway> reset dhcp server conflict all
1.1.35 reset dhcp server ip-in-use
Syntax
reset dhcp server ip-in-use { all | interface [ interface-type interface-number ] | ip
ip-address | pool [ pool-name ] }
View
User view
Parameter
all: Clears the dynamic address binding information about all IP addresses.