Command Manual – ACL
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 ACL Commands
Huawei Technologies Proprietary
1-19
[Quidway] acl number 3000
[Quidway-acl-adv-3000] rule 0 comment test
1.1.12 time-range
Syntax
time-range time-name { start-time to end-time days-of-the-week [ from start-time
start-date ] [ to end-time end-date ] | from start-time start-date [ to end-time end-date ]
| to end-time end-date }
undo time-range time-name [ start-time to end-time days-of-the-week [ from
start-time start-date ] [ to end-time end-date ] | from start-time start-date [ to end-time
end-date ] | to end-time end-date ]
View
System view
Parameter
time-name: Name of a special time range, used as the identifier of a reference.
start-time: Start time of a special time range, in the form of hh:mm. Optional argument.
end-time: End time of a special time range, in the form of hh:mm. Optional argument.
days-of-the-week: Day of the week when the special time range is effective. Optional
argument. Available arguments and argument combinations are as follows:
z Numerals (0 to 6)
z Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, and Sunday
z Working days (Monday through Friday)
z Off days (Saturday and Sunday)
z Daily, namely everyday of the week
from start-time start-date: Specifies the start date of a special time range, optional. In
the form of hh:mm MM/DD/ YYYY, start-time start-date and end-time end-date jointly
define a date in which the special time range takes effect.
to end-time end-date: Specifies the end date of a special time range, optional. In the
form of hh:mm MM/DD/ YYYY, start-time start-date and end-time end-date jointly
define a date on which the special time range takes effect.
Description
Use the time-range command to define a time range.
Use the undo time-range command to delete a time range.
The time range defined by means of the time-range command can include absolute
time sections and periodic time sections. start-time and end-time days-of-the-week
To Next Page
Loading...
Need help?
General