Huawei Quidway S3900 Series Command Manual

Command Manual –SSH Terminal Service
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 SSH Terminal Service
Configuration Commands
Huawei Technologies Proprietary
1-28
Parameter
ip-address: Source IP address needed to set.
Description
Use the ssh2 source-ip command to specify the source interface for SSH2 Client.
Use the undo ssh2 source-ip command to remove the specified source IP address.
Then, the address of the device determined by the system is for the user to access to
the SSH2 Server.
When the specified ip-address is not the IP address of the device, the command
prompts configuration fails.
Example
# Specify source IP address 192.168.0.1 for SSH2 Client.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ssh2 source-ip 192.168.1.1
1.3 SFTP Server Configuration Commands
1.3.1 sftp server enable
Syntax
sftp server enable
undo sftp server
View
System view
Parameter
None
Description
Use the sftp server enable command to enable the secure FTP (SFTP) server.
Use the undo sftp server enable command to disable the SFTP server.
By default, the SFTP server is disabled.
Example
# Enable the SFTP server.
<Quidway> system-view
System View: return to User View with Ctrl+Z.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English