Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-72
<Quidway> reset stop-accounting-buffer hwtacacs-scheme hwt1
1.3.13 retry stop-accounting
Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS scheme view
Parameter
retry-times: Maximum number of real-time stop-accounting request attempts. It is in
the range 1 to 300 and defaults to 100.
Description
Use the retry stop-accounting command to enable stop-accounting packet
retransmission and configure the maximum number of stop-accounting request
attempts.
Use the undo retry stop-accounting command to restore the default setting.
By default, stop-accounting packet retransmission is enabled and has 100 attempts
for each request.
Related command: reset stop-accounting-buffer, hwtacacs scheme, and display
stop-accounting-buffer.
Example
# Enable stop-accounting packet retransmission and allow up to 50 attempts for each
request.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs scheme hwt1
[Quidway-hwtacacs-hwt1] retry stop-accounting 50
1.3.14 secondary accounting
Syntax
secondary accounting ip-address [ port ]
undo secondary accounting

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English