Command Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Port Basic Configuration
Commands
Huawei Technologies Proprietary
1-16
Description
Use the giant-frame statistics enable command to enable the giant-frame statistics
function.
Use the undo giant-frame statistics enable command to disable the giant-frame
statistics function.
By default, the giant-frame statistics function is not enabled.
Example
# Enable the giant-frame statistics function.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] giant-frame statistics enable
1.1.15 interface
Syntax
interface interface-type interface-number
View
System view
Parameter
interface-type: Port type, which can be Aux, Ethernet, GigabitEthernet, LoopBack,
NULL or Vlan-interface.
interface-number: Port number, in the format of Unit ID/slot number/port number,
where:
z Unit ID is in the range of 1 to 8;
z The slot number is 0 if the port is an Ethernet port;
z The slot number is 1 if the port is a GigabitEthernet port.
For details about the types and port number ranges of the ports on S3900 series
Ethernet switches, refer to
Table 1-5.
Table 1-5 Description on port types and port number ranges
Range of port number
Switch model
Ethernet port GigabitEthernet port
S3924-SI 1 to 24 —
To Next Page
Loading...
