Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-73
View
HWTACACS scheme view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal format.
By default, the IP address of the secondary accounting server is 0.0.0.0.
port: Port number of the server, which is in the range of 1 to 65535 and defaults to 49.
Description
Use the secondary accounting command to configure a secondary HWTACACS
accounting server.
Use the undo secondary accounting command to delete the configured secondary
TACACS accounting server.
Note that:
z You are not allowed to assign the same IP address to both primary and
secondary accounting servers; otherwise, unsuccessful operation is prompted.
z If you repeatedly use this command, the latest configuration overwrites the
previous one.
z You can remove an accounting server only when it is not being used by any
active TCP connections.
Example
# Configure a secondary accounting server.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwtacacs scheme hwt1
[Quidway-hwtacacs-hwt1] secondary accounting 10.163.155.12 49
1.3.15 secondary authentication
Syntax
secondary authentication ip-address [ port ]
undo secondary authentication
View
HWTACACS scheme view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal format.
By default, the IP address of the secondary authentication server is 0.0.0.0.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English