EasyManuals Logo

Huawei Quidway S3900 Series Command Manual

Huawei Quidway S3900 Series
1159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #396 background imageLoading...
Page #396 background image
Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-48
Example
# Specify the trans-delay of transmitting LSA on the interface Vlan-interface 10 as 3
seconds.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 10
[Quidway-Vlan-interface10] ospf trans-delay 3
3.1.45 peer
Syntax
peer ip-address [ dr-priority dr-priority ]
undo peer ip-address
View
OSPF view
Parameter
ip-address: IP address of the peer.
dr-priority: Value of the corresponding priority of a neighbor in the NBMA network. It
ranges from 0 to 255 and defaults to 1.
Description
Use the peer command to configure the IP address of the neighbor router and specify
DR priority on an NBMA network.
Use the undo peer command to cancel this configuration.
Example
# Configure the IP address of the neighbor router as 10.1.1.1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ospf 1
[Quidway-ospf-1] peer 10.1.1.1
3.1.46 preference
Syntax
preference [ ase ] value
undo preference [ ase ]

Table of Contents

Other manuals for Huawei Quidway S3900 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei Quidway S3900 Series and is the answer not in the manual?

Huawei Quidway S3900 Series Specifications

General IconGeneral
BrandHuawei
ModelQuidway S3900 Series
CategorySwitch
LanguageEnglish

Related product manuals