Huawei Quidway S3900 Series Command Manual

Command Manual - HWPing
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 HWPing Commands
Huawei Technologies Proprietary
1-8
Description
Use the test-enable command to execute an HWPing test.
Use the undo test-enable command to disable an HWPing test.
 Note:
After you execute the test-enable command, the system does not display the test
result. You may view the test result information by executing the display hwping
command.
Related command: display hwping.
Example
# Execute the HWPing test defined by the test group “administrator-icmp”.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwping administrator icmp
[Quidway-hwping-administrator-icmp] test-enable
1.1.8 test-type
Syntax
test-type type
View
HWPing test group view
Parameter
type: Test type.
Description
Use the test-type command to configure the type of the test.
Currently the system only supports ICMP test.
Example
# Set the test type of the “administrator-icmp” test group to ICMP.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] hwping administrator icmp

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English