Huawei Quidway S3900 Series Command Manual

Command Manual – PoE & PoE Profile
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-7
View
Any view
Parameter
None
Description
Use the display poe temperature-protection command to display the enable/disable
status of the PoE over-temperature protection function on the switch.
Example
# Display the enable/disable status of the PoE over-temperature protection function on
the switch.
<Quidway> display poe temperature-protection
The temperature protection is enabled.
1.1.5 poe enable
Syntax
poe enable
undo poe enable
View
Ethernet port view
Parameter
None
Description
Use the poe enable command to enable the PoE feature on a port.
Use the undo poe enable command to disable the PoE feature on a port.
By default, the PoE feature on each port is disabled.
Example
# Enable the PoE feature on the current port.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet 1/0/3
[Quidway-Ethernet1/0/3] poe enable
Port power supply is enabled

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English