Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-46
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1]
1.2.17 radius trap
Syntax
radius trap { authentication-server-down | accounting-server-down }
undo radius trap { authentication-server-down | accounting-server-down }
View
System view
Parameter
None
Description
Use the radius trap command to enable the switch to send trap messages when its
RADIUS authentication or accounting server turns down.
Use the undo radius trap command to disable the switch from sending trap
messages when its RADIUS authentication or accounting server turns down.
By default, this function is disabled.
This configuration takes effect on all RADIUS scheme.
 Note:
A device considers its RADIUS server as being down if it has tried the configured
maximum times to send packets to the RADIUS server but does not receive any
response.
Example
# Enable the switch to send trap messages when its RADIUS authentication server
turns down.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius trap authentication-server-down

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English