Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 FTP and TFTP
Huawei Technologies Proprietary
1-31
Description
Use the verbose command to enable the verbose function, which displays execution
and response information of other related commands.
Use the undo verbose command to disable the verbose function.
The verbose function is enabled by default.
Example
# Enter FTP client view.
<Quidway> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:
230 Logged in successfully
[ftp]
# Enable the verbose function.
[ftp] verbose
1.3 TFTP Configuration Commands
1.3.1 display tftp source-ip
Syntax
display tftp source-ip
View
Any view
Parameter
None
Description
Use the display tftp source-ip display the source IP address that the TFTP client
always uses to connect with a TFTP server. If a source interface is specified for the
TFTP client, the IP address of the source interface will be displayed. If neither source IP
address nor source interface is specified for the TFTP client, 0.0.0.0 will be displayed.
To Next Page
Loading...
