Huawei Quidway S3900 Series Command Manual

Command Manual - QoS&QoS Profile
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 QoS Commands
Huawei Technologies Proprietary
1-2
Parameter
None
Description
Use the display qos cos-local-precedence-map command to view the
“COS-to-local-precedence” mapping table.
Example
# Display the “COS-to-local-precedence” mapping table.
<Quidway> display qos cos-local-precedence-map
cos-local-precedence-map:
cos(802.1p) : 0 1 2 3 4 5 6 7
---------------------------------------------------------------------
local precedence(queue) : 0 1 2 3 4 5 6 7
1.1.3 display qos-interface all
Syntax
display qos-interface { interface-type interface-number | unit-id } all
View
Any view
Parameter
interface-type interface-number: Port index.
unit-id: Unit ID of the switch.
Description
Use the display qos-interface all command to view all the QoS configuration of the
ports. If you do not input port parameters, this command will display the QoS parameter
configuration of all the ports of the switch, including traffic policing, rate limit, etc; if you
input port parameters, this command will display QoS parameter configuration of the
port, including traffic policing, rate limit, etc.
When the IRF feature is enabled, the interface-type interface-number argument or the
unit-id argument must be input.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English