Command Manual – VLAN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 VLAN Configuration Commands
Huawei Technologies Proprietary
1-5
Parameter
vlan-id: ID of the VLAN interface, in the range of 1 to 4,094.
Description
Use the interface Vlan-interface command to create a VLAN interface or enter VLAN
interface view.
Use the undo interface Vlan-interface command to delete the VLAN interface.
Related command: display interface Vlan-interface.
Example
# Enter Vlan-interface 1 view
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1]
1.1.5 name
Syntax
name text
undo name
View
VLAN view
Parameter
text: String that refers to the name of the current VLAN, in the range of 1 character to 32
characters. It can contain special characters and space.
Parameter
Use the name command to assign a name to a VLAN.
Use the undo name command to restore to the default VLAN name.
By default, the name of a VLAN is its VLAN ID, such as “VLAN 0001”.
Example
# Specify the name of VLAN 2 to ”test vlan”.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] vlan 2
[Quidway-vlan2] name test vlan
To Next Page
Loading...
