Huawei Quidway S3900 Series Command Manual

Command Manual – ARP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 ARP Configuration Commands
Huawei Technologies Proprietary
1-6
Refer to Table 1-1 for the description on the above output information.
1.1.6 display arp count
Syntax
display arp count [ [ dynamic | static ] [ | { begin | exclude | include } text ] |
ip-address ]
View
Any view
Parameter
dynamic: Counts the dynamic ARP mapping entries.
static: Counts the static ARP mapping entries.
| { begin | exclude | include } text: Regular expression, where:
begin: Counts the ARP mapping entries from the first ARP entry that contains the string
given by the text argument.
exclude: Counts the ARP mapping entries that do not contain the string given by the
text argument.
Include: Counts the ARP mapping entries that contain the string given by the text
argument.
text: String used to filter ARP mapping entries.
ip-address: IP address. The ARP mapping entries containing the IP address are to be
counted in.
Description
Use the display arp count command to display the number of the specified ARP
mapping entries. If no parameter is specified, the total number of ARP mapping entries
is displayed.
Related command: arp static, reset arp.
Example
# Display the total number of ARP mapping entries.
<Quidway> display arp count
1 entry found
1.1.7 display arp timer aging
Syntax
display arp timer aging

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English