Command Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 Commands for User Control
Huawei Technologies Proprietary
2-2
View
User view
Parameter
user-id: Web user ID.
user-name: User name of the Web user. This argument can contain 1 to 80 characters.
all: Specifies all Web users.
Description
Use the free web-users command to disconnect a specified Web user or all Web users
by force.
Example
# Disconnect all Web users by force.
<Quidway> free web-users all
2.1.3 ip http acl
Syntax
ip http acl acl-number
undo ip http acl
View
System view
Parameter
acl-number: ACL number ranging from 2,000 to 2,999.
Description
Use the ip http acl command to apply an ACL to filter Web users.
Use the undo ip http acl command to disable the switch from filtering Web users using
the ACL.
By default, the switch does not use the ACL to filter Web users.
Example
# Apply ACL 2000 to filter Web users (assuming that ACL 2,000 already exists.)
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ip http acl 2000