Huawei Quidway S3900 Series Command Manual

Command Manual – FTP and TFTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 FTP and TFTP
Huawei Technologies Proprietary
1-34
1.3.5 tftp tftp-server source-interface
Syntax
tftp tftp-server source-interface interface-type interface-number { get source-file
[ dest-file ] | put source-file-url [ dest-file ] }
View
User view
Parameter
tftp-server: IP address or host name of the TFTP server to be connected to.
interface-type: Type of the source interface.
interface-number: Number of the source interface.
get: Specifies to download a file from the TFTP server.
source-file: Name of the file to be downloaded.
dest-file: Name of the new file to be saved locally.
put: Specifies to upload a file to the TFTP server.
source-file-url: Path and name of the file to be uploaded.
dest-file: Name of the new file to be saved on the TFTP server.
Description
Use the tftp tftp-server source-interface command to connect to a TFTP server
through the specified source interface, and perform download or upload operations. If
the specified source interface does not exist, a prompt appears to show the command
fails to be executed.
Example
# Connect to the remote TFTP server whose IP address is 192.168.8.8 through the
source interface Vlan-interface1, and download the file named 3900.bin from it.
<Quidway> tftp 192.168.8.8 source-interface Vlan-interface 1 get 3900.bin
1.3.6 tftp tftp-server source-ip
Syntax
tftp tftp-server source-ip ip-address { get source-file [ dest-file ] | put source-file-url
[ dest-file ] }
View
User view

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English