Huawei Quidway S3900 Series Command Manual

Command Manual – GVRP
Quidway S3900 Series Ethernet Switches-Release
1510 Chapter 1 GVRP Configuration Commands
Huawei Technologies Proprietary
1-6
Example
# Clear GARP statistics of all ports.
<Quidway> reset garp statistics
1.2 GVRP Configuration Commands
1.2.1 display gvrp statistics
Syntax
display gvrp statistics [ interface interface-list ]
View
Any view
Parameter
interface-list: List of Ethernet ports. You can specify multiple Ethernet ports by providing
this argument in the form of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index lists for this argument.
Description
Use the display gvrp statistics command to display the GVRP statistics of specified
or all trunk ports.
This command displays the following information:
z GVRP status
z Number of the GVRP entries that fail to be registered
z Source MAC address of the previous GVRP PDU
z GVRP registration type of a port
Example
# Display the GVRP statistics of port Ethernet1/0/1, assuming that the port is a trunk
port.
<Quidway> display gvrp statistics interface Ethernet1/0/1
GVRP statistics on port Ethernet1/0/1
GVRP Status : Enabled
GVRP Failed Registrations : 0
GVRP Last Pdu Origin : 0000-0000-0000
GVRP Registration Type : Normal

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English