Command Manual – SNMP and RMON
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 2 RMON Configuration Commands
Huawei Technologies Proprietary
2-15
System View: return to User View with Ctrl+Z.
[Quidway]interface Ethernet 1/0/1
[Quidway-Ethernet1/0/1] rmon statistics 1
[Quidway-Ethernet1/0/1] quit
[Quidway] rmon prialarm 2 ((.1.3.6.1.2.1.16.1.1.1.4.1)*100) test 10
changeratio rising_threshold 50 1 falling_threshold 5 2 entrytype forever
owner user1
# Remove the extended alarm entry numbered 2 from the extended alarm table.
[Quidway] undo rmon prialarm 2
2.1.11 rmon statistics
Syntax
rmon statistics entry-number [ owner text ]
undo rmon statistics entry-number
View
Ethernet port view
Parameter
entry-number: Statistics entry Index, in the range of 1 to 65535.
owner text: Specifies the owner of the entry, a string comprising 1 to 127 characters.
Description
Use the rmon statistics command to add an entry to the statistics table.
Use the undo rmon statistics command to remove an entry from the statistics table.
The RMON statistics management function is used to take statistics of the usage of the
monitored ports and errors occurred to them. The statistics includes the number of the
following items: collisions, packet with CRC errors, undersize (or oversize) packets,
broadcast and multicast packets, received packets and bytes and so on.
 Note:
For each port, only one RMON alarm table entry can be created, that is to say, if one
RMON alarm table entry was already created for a given port, creation of another entry
with a different index number for the same port will not succeed.
You can use the display rmon statistics command to display the statistics entries.
To Next Page
Loading...
Need help?
General