New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DHCP Server Configuration
Commands
Huawei Technologies Proprietary
1-35
If you execute the nbns-list command repeatedly, the new configuration overwrites
the previous one.
Related command: dhcp server ip-pool, dhcp server nbns-list and netbios-type.
Example
# Enter system view.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
# Configure the NetBIOS server IP address 10.12.1.99 for the global DHCP address
pool 0.
[Quidway] dhcp server ip-pool 0
[Quidway-dhcp-pool-0] nbns-list 10.12.1.99
1.1.31 netbios-type
Syntax
netbios-type { b-node | h-node | m-node | p-node }
undo netbios-type
View
DHCP address pool view
Parameter
b-node: Specifies the broadcast type. Nodes of this type acquire host name-to-IP
address mapping by broadcasting.
p-node: Specifies the peer-to-peer type. Nodes of this type acquire host name-to-IP
address mapping by communicating with the NetBIOS server.
m-node: Specifies the mixed type. Nodes of this type are p-nodes with some
broadcasting features.
h-node: Specifies the hybrid type. Nodes of this type are b-nodes with peer-to-peer
communicating features.
Description
Use the netbios-type command to configure the DHCP clients of a global address
pool to be of specified NetBIOS node type.
Use the undo netbios-type command to restore the default NetBIOS node type.
By default, no NetBIOS node type is specified. In this case, the client uses h-node.
Related command: dhcp server ip-pool, dhcp server netbios-type and nbns-list.
To Next Page
Loading...
