Huawei Quidway S3900 Series - Vlan-Vpn Inner-Cos-Trust; Vlan-Vpn Tpid

Command Manual – VLAN VPN
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 VLAN-VPN Commands
Huawei Technologies Proprietary
1-3
1.1.3 vlan-vpn inner-cos-trust
Syntax
vlan-vpn inner-cos-trust enable
undo vlan-vpn inner-cos-trust
View
Ethernet port view
Parameter
None
Description
Use the vlan-vpn inner-cos-trust enable command to enable the function of
replicating inner tag priority.
Use the undo vlan-vpn inner-cos-trust command to disable the function of replicating
inner tag priority.
By default, the function of replicating inner tag priority is disabled.
Example
# Enable the inner tag priority replication function for the Ethernet 1/0/2 port.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Ethernet 1/0/2
[Quidway-Ethernet1/0/2] vlan-vpn inner-cos-trust enable
1.1.4 vlan-vpn tpid
Syntax
vlan-vpn tpid value
undo vlan-vpn tpid
View
Ethernet port view
Parameter
value: User-defined TPID value (in hexadecimal format)in the range of 1 to 0xFFFF.
Description
Use the vlan-vpn tpid command to set a TPID value for a port.
Use the undo vlan-vpn tpid command to restore the default TPID value.