Huawei Quidway S3900 Series Command Manual

Command Manual – Port Basic Configuration
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Port Basic Configuration
Commands
Huawei Technologies Proprietary
1-13
- broadcasts, - multicasts, - pauses
Output: 0 output errors, - underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, - no carrier
(The following displayed information is omitted)
Table 1-4 Description on the fields of the display unit command
Field Description
Aux1/0/0
Description : Aux Interface
The description string of the AUX port is "
A
ux
Interface".
For the description of other fields, refer to
Table 1-2.
1.1.11 duplex
Syntax
duplex { auto | full | half }
undo duplex
View
Ethernet port view
Parameter
auto: Sets the port to auto-negotiation mode.
full: Sets the port to full duplex mode.
half: Sets the port to half duplex mode.
Description
Use the duplex command to set the duplex mode of the current port.
Use the undo duplex command to restore the default duplex mode, that is,
auto-negotiation.
By default, the port is in auto-negotiation mode.
Related command: speed.
Example
# Set the Ethernet1/0/1 port to auto-negotiation mode.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface ethernet 1/0/1

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English