Huawei Quidway S3900 Series Command Manual

Command Manual – IP Address and Confiugration
Quidway S3900 Series Ethernet Switches-Release
1510 Chapter 2 IP Performance Configuration Commands
2-8
Field Description
destination unreachable Number of input/output packets with unreachable
destination
source quench Number of input/output source quench packets
redirects Number of input/output redirected packets
echo reply Number of input/output echo reply packets
parameter problem Number of input/output packets with parameter
problem
timestamp Number of input/output timestamp packets
information request Number of input information request packets
mask requests Number of input/output mask request packets
mask replies Number of input/output mask reply packets
information reply Number of output information reply packets
time exceeded Number of time exceeded packets
2.1.8 display ip socket
Syntax
display ip socket [ socktype sock-type ] [ task-id socket-id ]
View
Any view
Parameter
sock-type: Type of a socket, ranging from 1 to 3. These values correspond to
SOCK_STREAM (TCP socket), SOCK_DGRAM (UDP socket or socket based on the
link layer), and SOCK_RAW (RAW IP socket).
task-id: ID of a task, with the value ranging from 1 to 100.
socket-id: ID of a socket, with the value ranging from 0 to 3072.
Description
Use the display ip socket command to display the information of the current socket.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English