Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-30
3.1.24 display ospf routing
Syntax
display ospf [ process-id ] routing
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command applies
to all current OSPF processes.
Description
Use the display ospf routing command to display the information about OSPF routing
table.
Example
# Display OSPF routing information.
<Quidway> display ospf routing
OSPF Process 1 with Router ID 1.1.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
10.110.0.0/16 1 Net 10.110.10.1 10.10.10.1 0.0.0.0
10.10.0.0/16 1 Stub 10.10.0.1 3.3.3.3 0.0.0.0
Total Nets: 2
Intra Area: 2 Inter Area: 0 ASE: 0 NSSA: 0
Table 3-15 Description on the fields of the display ospf routing command
Field Description
Destination Destination network segment
Cost Cost of route
Type Type of route
NextHop Next hop of route
AdvRouter ID of the router that advertises the route
Area Area ID
Intra Area Number of intra-area routes
Inter Area Number of inter-area routes

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English