Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-29
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command applies
to all current OSPF processes.
Description
Use the display ospf retrans-queue command to display the information about the
OSPF retransmission queue.
Example
# Display the information about the OSPF retransmission queue.
<Quidway> display ospf retrans-queue
OSPF Process 200 with Router ID 103.160.1.1
Retransmit List
The Router's Neighbors is
RouterID: 162.162.162.162 Address: 103.169.2.2
Interface: 103.169.2.5 Area: 0.0.0.1
Retrans list:
Type: ASE LSID:129.11.77.0 AdvRouter:103.160.1.1
Type: ASE LSID:129.11.108.0 AdvRouter:103.160.1.1
Table 3-14 Description on the fields of the display ospf retrans-queue command
Field Description
RouterID Router ID of neighbor router
Address
Address of the interface, through which
neighbor routers communicate with the
router
Interface
Address of the interface on the network
segment
Area Area number of OSPF
Type Type of the LSA
LSID Link State ID of the LSA
AdvRouter
Router ID of the router that advertises
the LSA

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English