New Feature Manual - DHCP
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 DHCP Server Configuration
Commands
Huawei Technologies Proprietary
1-21
<Quidway> system-view
System View: return to User View with Ctrl+Z.
# Enter VLAN-interface 1 view.
[Quidway] interface Vlan-interface 1
# Enable the DHCP server to support all the sub-options of option 184 in
VLAN-interface 1. The NCP IP address is 1.1.1.1 and the IP address of the alternate
server is 2.2.2.2. The voice VLAN is enabled, with the ID being 3. The fail-over IP
address is 3.3.3.3 and the dial number string is 99*.
[Quidway-Vlan-interface1] dhcp select interface
[Quidway-Vlan-interface1] dhcp server voice-config ncp-ip 1.1.1.1
[Quidway-Vlan-interface1] dhcp server voice-config as-ip 2.2.2.2
[Quidway-Vlan-interface1] dhcp server voice-config voice-vlan 3 enable
[Quidway-Vlan-interface1] dhcp server voice-config fail-over 3.3.3.3 99*
1.1.19 dhcp server voice-config interface
Syntax
dhcp server voice-config { ncp-ip ip-address | as-ip ip-address | voice-vlan vlan-id
{ enable | disable } | fail-over ip-address dialer-string } { interface interface-type
interface-number [ to interface-type interface-number ] | all }}
undo dhcp server voice-config [ ncp-ip | as-ip | voice-vlan | fail-over ] { interface
interface-type interface-number [ to interface-type interface-number ] | all }
View
System view
Parameter
ncp-ip: Specifies the IP address of the network call processor (NCP).
as-ip: Specifies the IP address of the alternate server (AS).
voice-vlan: Specifies the voice VLAN.
fail-over: Specifies the Fail-over call routing.
ip-address: IP address of the NCP, alternate server, or Fail-over.
vlan-id: ID of the voice VLAN. This argument ranges from 2 to 4094.
enable: Enables the voice VLAN.
disable: Disables the voice VLAN.
dialer-string: Dial number string. This argument comprises of number 0 through 9 and
the * character (acting as the wildcard).
To Next Page
Loading...
Need help?
General