Huawei Quidway S3900 Series Command Manual

Command Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
Huawei Technologies Proprietary
1-43
Example
# Set the IP address and UDP port number of the primary authentication/authorization
server used by the RADIUS scheme radius1 to 10.110.1.1 and 1812.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius scheme radius1
New Radius scheme
[Quidway-radius-radius1] primary authentication 10.110.1.1 1812
1.2.14 radius client
Syntax
radius client enable
undo radius client
View
System view
Parameter
None
Parameter
Use the radius client enable command to enable UDP port for AAA RADIUS client.
Use the undo radius client command to disable UDP port for AAA RADIUS client.
By default, UDP port for AAA RADIUS client is enabled.
Related command: radius scheme.
Example
# Enable UDP port for AAA RADIUS client.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] radius client enable
1.2.15 radius nas-ip
Syntax
radius nas-ip ip-address
undo radius nas-ip

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English