Huawei Quidway S3900 Series Command Manual

Command Manual – Routing Protocol
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-42
Example
# Bind MIB operation to OSPF process 100.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ospf mib-binding 100
# Bind MIB operation to OSPF process 200.
[Quidway] ospf mib-binding 200
# Cancel the binding of MIB operation.
[Quidway] undo ospf mib-binding
3.1.38 ospf mtu-enable
Syntax
ospf mtu-enable
undo ospf mtu-enable
View
Interface view
Parameter
None.
Description
Use the ospf mtu-enable command to enable the interface to write MTU value when
sending DD packets.
Use the undo ospf mtu-enable command to restore the default settings.
By default, the MTU value is 0 when sending DD packets. That is, the actual MTU value
of the interface is not written.
Database Description (DD) packets are used to describe its own LSDB when the router
running OSPF protocol is synchronizing the database.
The default MTU value of DD packet is 0. You can use this command to configure the
specified interface manually to write the MTU value area in DD packets when sending
DD packets. That is, the actual MTU value of the interface is written in.
Example
# Configure interface Vlan-interface 3 to write MTU value area when sending DD
packets.
<Quidway> system-view
System View: return to User View with Ctrl+Z.

Huawei Quidway S3900 Series Specifications

General

Brand	Huawei
Model	Quidway S3900 Series
Category	Switch
Language	English